To set up printing of pattern on A4 sheets, use “Test Square No.2”! The test square is located on the first sheet in the pattern file. Dress pattern. Fitted dress, lined, with cutting waistline, length to mid-calf. The bodice is with soft sleeve. There are vertical reliefs, average seam and low cut, processed by finishing insert on the front. On the back there are also vertical reliefs and average seam, in which there is a fastener on the zipper-tape. The skirt of dress is circular. The garment is equipped with a removable belt with a fastener on buttons or eyelets. The length of ready-made dress by the average seam of the back from waistline in size 44 at growth 164-170 is 115, 0 cm (gorge made more profound to 1, 0 cm). Stitch shaping by the chest is 4, 0 cm (in total volume – 8, 0 cm), stitch shaping by the waist is 3, 0 cm (in total volume – 6,0 cm). Fabric suggestion: dense dress and suit fabrics, keeping the form; Finishing (central part of the front) – fabrics with similar properties; Lining fabrics. Fabric consumption: fabric width is 140-150cm, the length of the top is 3,40 m – 3,70 m, the length of finishing fabric is 0,35 -0,40 m, the length of lining is 2,40 m – 2,60 m. Fabric consumption is given with margin in case of sewing or cutting mistake. Pattern pieces should be in expanded form. Pattern is given with seam allowances. Degree of difficulty – “Advanced Beginner” Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories). The pattern in your order is in two print options: 1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew! 2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*262 cm. Presented a photo of dress from Paule Ka Resort 2017 collection for visual demonstration of pattern №466. To create this pattern, we were inspired by photos from the Internet. These photos were “inspired” for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.